A Installing R and RStudio | Hands-On Programming with R (2024)

To get started with R, you need to acquire your own copy. This appendix will show you how to download R as well as RStudio, a software application that makes R easier to use. You’ll go from downloading R to opening your first R session.

Both R and RStudio are free and easy to download.

A.1 How to Download and Install R

R is maintained by an international team of developers who make the language available through the web page of The Comprehensive R Archive Network. The top of the web page provides three links for downloading R. Follow the link that describes your operating system: Windows, Mac, or Linux.

A.1.1 Windows

To install R on Windows, click the “Download R for Windows” link. Then click the “base” link. Next, click the first link at the top of the new page. This link should say something like “Download R 3.0.3 for Windows,” except the 3.0.3 will be replaced by the most current version of R. The link downloads an installer program, which installs the most up-to-date version of R for Windows. Run this program and step through the installation wizard that appears. The wizard will install R into your program files folders and place a shortcut in your Start menu. Note that you’ll need to have all of the appropriate administration privileges to install new software on your machine.

A.1.2 Mac

To install R on a Mac, click the “Download R for Mac” link. Next, click on the R-3.0.3 package link (or the package link for the most current release of R). An installer will download to guide you through the installation process, which is very easy. The installer lets you customize your installation, but the defaults will be suitable for most users. I’ve never found a reason to change them. If your computer requires a password before installing new progams, you’ll need it here.

Binaries Versus Source

R can be installed from precompiled binaries or built from source on any operating system. For Windows and Mac machines, installing R from binaries is extremely easy. The binary comes preloaded in its own installer. Although you can build R from source on these platforms, the process is much more complicated and won’t provide much benefit for most users. For Linux systems, the opposite is true. Precompiled binaries can be found for some systems, but it is much more common to build R from source files when installing on Linux. The download pages on CRAN’s website provide information about building R from source for the Windows, Mac, and Linux platforms.

A.1.3 Linux

R comes preinstalled on many Linux systems, but you’ll want the newest version of R if yours is out of date. The CRAN website provides files to build R from source on Debian, Redhat, SUSE, and Ubuntu systems under the link “Download R for Linux.” Click the link and then follow the directory trail to the version of Linux you wish to install on. The exact installation procedure will vary depending on the Linux system you use. CRAN guides the process by grouping each set of source files with documentation or README files that explain how to install on your system.

32-bit Versus 64-bit

R comes in both 32-bit and 64-bit versions. Which should you use? In most cases, it won’t matter. Both versions use 32-bit integers, which means they compute numbers to the same numerical precision. The difference occurs in the way each version manages memory. 64-bit R uses 64-bit memory pointers, and 32-bit R uses 32-bit memory pointers. This means 64-bit R has a larger memory space to use (and search through).

As a rule of thumb, 32-bit builds of R are faster than 64-bit builds, though not always. On the other hand, 64-bit builds can handle larger files and data sets with fewer memory management problems. In either version, the maximum allowable vector size tops out at around 2 billion elements. If your operating system doesn’t support 64-bit programs, or your RAM is less than 4 GB, 32-bit R is for you. The Windows and Mac installers will automatically install both versions if your system supports 64-bit R.

A.2 Using R

R isn’t a program that you can open and start using, like Microsoft Word or Internet Explorer. Instead, R is a computer language, like C, C++, or UNIX. You use R by writing commands in the R language and asking your computer to interpret them. In the old days, people ran R code in a UNIX terminal window—as if they were hackers in a movie from the 1980s. Now almost everyone uses R with an application called RStudio, and I recommend that you do, too.

R and UNIX

You can still run R in a UNIX or BASH window by typing the command:

R

which opens an R interpreter. You can then do your work and close the interpreter by running q() when you are finished.

A.3 RStudio

RStudio is an application like Microsoft Word—except that instead of helping you write in English, RStudio helps you write in R. I use RStudio throughout the book because it makes using R much easier. Also, the RStudio interface looks the same for Windows, Mac OS, and Linux. That will help me match the book to your personal experience.

You can download RStudio for free. Just click the “Download RStudio” button and follow the simple instructions that follow. Once you’ve installed RStudio, you can open it like any other program on your computer—usually by clicking an icon on your desktop.

The R GUIs

Windows and Mac users usually do not program from a terminal window, so the Windows and Mac downloads for R come with a simple program that opens a terminal-like window for you to run R code in. This is what opens when you click the R icon on your Windows or Mac computer. These programs do a little more than the basic terminal window, but not much. You may hear people refer to them as the Windows or Mac R GUIs.

When you open RStudio, a window appears with three panes in it, as in Figure A.1. The largest pane is a console window. This is where you’ll run your R code and see results. The console window is exactly what you’d see if you ran R from a UNIX console or the Windows or Mac GUIs. Everything else you see is unique to RStudio. Hidden in the other panes are a text editor, a graphics window, a debugger, a file manager, and much more. You’ll learn about these panes as they become useful throughout the course of this book.

A Installing R and RStudio | Hands-On Programming with R (1)

Figure A.1: The RStudio IDE for R.

Do I still need to download R?

Even if you use RStudio, you’ll still need to download R to your computer. RStudio helps you use the version of R that lives on your computer, but it doesn’t comewith a version of R on its own.

A.4 Opening R

Now that you have both R and RStudio on your computer, you can begin using R by opening the RStudio program. Open RStudio just as you would any program, by clicking on its icon or by typing “RStudio” at the Windows Run prompt.

A Installing R and RStudio | Hands-On Programming with R (2024)

FAQs

How to install R and RStudio step by step? ›

To install RStudio Desktop:
  1. Install R.
  2. Go to the RStudio website, navigate to the RStudio Desktop Download page, and download RStudio Desktop.
  3. Run the installer and follow the prompts.
  4. Click the desktop icon to initialize RStudio.

Do we need to install both R and RStudio? ›

Even if you use RStudio, you'll still need to download R to your computer. RStudio helps you use the version of R that lives on your computer, but it doesn't come with a version of R on its own.

Should I install R or RStudio first? ›

We need to install two things onto your computer. The first is R, this is the programming language we will use. After that we need to install RStudio, this is a front end program that lets you write R code, view plots, and do many other useful things.

How to run R code using RStudio? ›

To run an R command, put the cursor on the line of the command and then click the Run button at the top of the file window. Or just press CTRL-Enter.

Can I use RStudio without installing R? ›

R and RStudio are not the same thing. We can run R without RStudio if we need to, but we cannot run RStudio without R. Remember that!

How do I load an R file into RStudio? ›

The easiest way to load the data into R is to double-click on the particular file yourfile. RData after you download it to your computer. This will open in RStudio only if you have associated the . RData files with RStudio.

What is the difference between R programming and RStudio? ›

R is an open-source programming language that is used for programming, data analysis and data visualisation. It is widely used for statistical analysis. RStudio is a Graphical User Interface (GUI) for R. R and RStudio are available on all of the University-managed computers across campus and via UniDesk.

How to start R programming? ›

No one starting point will serve all beginners, but here are 6 ways to begin learning R.
  1. Install , RStudio, and R packages like the tidyverse. ...
  2. Spend an hour with A Gentle Introduction to Tidy Statistics In R. ...
  3. Start coding using RStudio. ...
  4. Publish your work with R Markdown. ...
  5. Learn about some power tools for development.

Can I use RStudio instead of R? ›

RStudio is actually an add-on to R: it takes the R software and adds to it a very user-friendly graphical interface. Thus, when one uses RStudio, they are still using the full version of R while also getting the benefit of greater functionality and usability due to an improved user interface.

How do I know if R is installed correctly? ›

How to check if R is installed on a Windows PC
  1. Check if there is an “R” icon on the desktop of the computer that you are using. If so, double-click on the “R” icon to start R. ...
  2. Click on the “Start” menu at the bottom left of your Windows desktop, and then move your mouse over “All Programs” in the menu that pops up.

What version of R works with RStudio? ›

In order to run the RStudio IDE, you need to have already installed R 3.6. 0 or higher. You can download the most recent version of R for your environment from CRAN.

What is the prerequisite for installing RStudio? ›

Home > Introduction to R-Studio > System Requirements
  1. • An Intel-compatible platform running Windows 11, 10 /8.1/8 /7 /Vista /XP /2000 Windows Server 2022, 2019 /2016 /2012 /2008 /2003.
  2. At least 256 MB of RAM, a mouse, and enough disk space for recovered files, image files, etc.

What coding does RStudio use? ›

The RStudio IDE is partly written in the C++ programming language and uses the Qt framework for its graphical user interface. The bigger percentage of the code is written in Java.

How to run an entire R script in RStudio? ›

To run the entire document press the Ctrl+Shift+Enter keys (or use the Source toolbar button).

How do you format R code in RStudio? ›

Reformat R scripts

Use the following shortcuts in RStudio to reformat your code: Ctrl + I - Fixes line indentations. Ctrl + Shift + A - Does a complete reformat of the selected part of a code.

How do I install a new version of R RStudio? ›

In RStudio, Go to "Tools" in the top menu and select "Global Options". In the "Global Options" dialog box, click on "General" on the left panel. Look for the "R version" section on the right panel. Click on the "Change" button next to "R version".

How do I install R and RStudio on my Mac? ›

Install R and RStudio for Mac
  1. To install R, go to cran.r-project.org. ...
  2. Click Download R for (Mac) OS X.
  3. Check the Latest release: section for the appropriate version and follow the directions for download.
  4. Once the file download is complete, click to open the installer. ...
  5. Once the R installer has finished, click Close.
Dec 14, 2023

What is the difference between R and RStudio? ›

RStudio is actually an add-on to R: it takes the R software and adds to it a very user-friendly graphical interface. Thus, when one uses RStudio, they are still using the full version of R while also getting the benefit of greater functionality and usability due to an improved user interface.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Duane Harber

Last Updated:

Views: 5796

Rating: 4 / 5 (51 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Duane Harber

Birthday: 1999-10-17

Address: Apt. 404 9899 Magnolia Roads, Port Royceville, ID 78186

Phone: +186911129794335

Job: Human Hospitality Planner

Hobby: Listening to music, Orienteering, Knapping, Dance, Mountain biking, Fishing, Pottery

Introduction: My name is Duane Harber, I am a modern, clever, handsome, fair, agreeable, inexpensive, beautiful person who loves writing and wants to share my knowledge and understanding with you.